How to view Microsensor Data

How to view Microsensor Data

Once your Microsensor is added to the LEXI Gateway, you can view its data via your LEXI app.

  • Open your LEXI app, and navigate to Devices -> Sensors.

  • Click on the right arrow “>” icon located on the upper right corner on the device card to see the data collected by your Microsensor.



Microsensor data is also shown via the 4 dots on the Microsensor tile. Below is how to read the 4 dots (from right to left):



Dot 1 - Grey Color - Currently this dot does not have any use.

Dot 2 - Lux

     lux<= 15 : Green Color
     lux >= 15 && lux < 65 :Yellow color
     lux>= 65 && lux < 75 : Orange Color
     lux >= 75 : Red Color

Dot 3 - Hum

      hum <= 65 : Green Color
      hum >= 65 && hum < 85 :Yellow color
      hum >= 85 && hum < 95 : Orange Color
      hum >= 95 : Red Color

Dot 4 - Temperature


       temp <= 65  : Green Color
       temp >= 65 && temp < 85 :Yellow color
       temp >= 85 && temp < 95 : Orange Color
       temp >= 95 : Red Color

    • Related Articles

    • How to view Door/Window Sensor Data

      Once your Door/Window sensor is added to your Gateway, you can view its data via your LEXI app. Open your LEXI app, and navigate to Devices. Under the Sensors tab, click on the right arrow “>” icon located on the upper right corner on the device card ...

    • How to view Smoke Sensor data

      Viewing data collected by your Smoke Sensor is easy Open your LEXI app, and navigate to Devices -> Sensors. Click on the right arrow “>” icon located on the upper right corner on the device card to see the data collected by your Smoke Sensor.

    • How to view CO Sensor data

      Viewing data collected by your CO Sensor is easy Open your LEXI app, and navigate to Devices -> Sensors. Click on the right arrow “>” icon located on the upper right corner on the device card to see the data collected by your CO Sensor.

    • How to view Smart Air Quality Monitor data

      Viewing data collected by your Smart Air Quality Monitor is easy Open your LEXI app, and navigate to Devices -> Sensors. Click on the right arrow “>” icon located on the upper right corner on the device card to see the data collected by your AQM.

    • How to reset Microsensor

      You can easily reset your Microsensor to bring it to factory default settings. To reset your Microsensor, please follow the steps give below: Press and release the reset button (by inserting a small pin into the pinhole on the side of the device) and ...